Accessories
We carry a selection of in-stock accessory items and offer additional special-order products that complement and support our precast line. All of our accessories are sourced from trusted vendors known for their quality, value, and long-standing dependability, ensuring our customers receive reliable solutions for every project.
Septic Filters
We stock two popular effluent filters for septic tanks—both reliable, trusted components from manufacturers known for proven quality. We offer the EF-6 Effluent Filter from Tuf-Tite and the PL 122 Effluent Filter with Ball from PolyLok.
EF-6 (overview)
EF-6 (detail)
PL-122 (detail)
PL-122 (overview)
Key Differences
| Feature | PL-122 (PolyLok) | EF-6 (Tuf-Tite) |
|---|---|---|
| Designed flow / system size | Ideal for residential or small commercial, up to ~3,000 GPD (gallons per day) per manufacturer. | Higher-capacity “Commercial Series” designed for larger systems, rated at ~1,500 GPD in some specs but with a larger filtration surface. |
| Filtration surface length | ~122 linear feet of slot length. | ~244 linear feet of slot length—so effectively about double the filtration surface. |
| Special features | Automatic shut-off ball (prevents solids escaping during servicing) + gas-deflector ball built in. | Molded-in solids/gas deflector, and certified to ANSI/NSF Standard 46 (per advertised spec). |
| Typical applications | Residential homes or smaller wastewater systems where moderate flow and maintenance intervals suffice. | Larger homes, multi-unit/multi-family systems, small commercial installations where higher flow and larger capacity are needed. |
| Cost/weight/size considerations | Slightly more compact; higher suitability for smaller installations; easier to service. | Larger capacity means potentially larger size/cost; best used where system demand justifies it. |
What this means for selection
- If you have a standard residential septic tank or a smaller installation, the PL-122 offers excellent fine-filtration and smart features (the shut-off ball) at a suitable capacity.
- If you’re servicing a larger flow application (e.g., multi-unit dwelling, commercial property, or a higher-capacity system), the EF-6 gives you significantly more filtration surface and is built for heavier duty use.
- From a maintenance standpoint: The larger filtration surface of the EF-6 means longer intervals (or more margin) between servicing in high-flow contexts.
- Conversely, installing an EF-6 in a small-flow system may be overkill (cost, size, servicing effort) when a PL-122 suffices.
Drainage Fabric for Septic Beds
We carry the Mirafi 140N geotextile fabric for septic bed installations—trusted as one of the best-performing non-woven fabrics in the industry. Sourced through Great North Hardscape, this material delivers the reliability, strength, and drainage performance required for long-lasting septic systems.
Roll (in stock)
Mirafi 140N
Geotextile fabric
Product Overview
The Mirafi 140N / NC is a heavier-duty non-woven polypropylene geotextile, engineered for civil and construction applications where high strength, drainage, and soil-separation performance are required. It easily conforms to ground or trench surfaces for efficient installation.
Key Features
- High puncture and tear resistance to withstand installation stresses.
- Excellent drainage: high permittivity enables significant water flow while retaining soil.
- Chemically stable for use in a wide range of aggressive environments.
- Cost-effective alternative to graded-aggregate filters in many applications.
Specifications
- 3 ft x 100 ft rolls in stock @ 12 lbs per roll
Applications
Ideal for trench drains, sub-drain layers, road base separation, and other heavy-duty drainage or filtration installations where non-woven geotextile performance is required.
Polylok
Polylok Septic-Tank Access & Retrofit Solutions — We’re proud to offer Polylok’s industry-leading range of access products, including 20″ and 24″ diameter retrofit solutions for septic-tank lids and risers. Whether you’re updating an existing system or installing new infrastructure, our team can help you select the right Polylok components for your needs — and if your project calls for something outside our standard stock, we’re able to special order any item from the full Polylok catalogue.
With durable construction, precise fit-up, and innovative design, Polylok’s access systems deliver reliable performance in demanding wastewater and septic applications. Let us help you find the right retrofit solution for your tank access, meet code requirements, and ensure long-term ease of service.
What we can do
- Help select the right parts for retrofits or new installs
- Support code requirements and long-term serviceability
- Special order anything from the full Polylok catalogue
Risers
Polylok has combined all the best features of concrete and plastic risers to create their patented riser system. Polylok risers hold their shape, are stackable, screw together, and are water and airtight. Structural ribs inside prevent frost from adhering to the riser in frost prone areas.
Risers
Risers (detail)
Stackable system
- Watertight and airtight
- Allows septic tank to be easily vacuum or water tested
- Highest UV-Ray Protection on the market today
- Easy to bring septic access to grade
- Made of high density Polyethylene which won't shatter like some Polypropylene risers
- Tear off riser ring to eliminate frost problems
- Structural ribs inside prevent frost from adhering to the riser in frost prone areas
Why it matters
Better sealing, easier access, and more durable performance in frost-prone environments—built for long-term serviceability.
Adapter Ring / Plate
The Adapter Ring is ideal for retrofitting existing septic tanks and can be secured with ease. The Adapter Ring is made of virgin high density polyethylene.
Adapter ring
Retrofit plate
Install view
- Adapter ring accepts either 20" or 24" riser
- Covers up to 25" square opening
- Save time and money with easy installation
20" and 24" Riser Covers (Lids)
Ideal for use on septic tanks with matching risers. Polylok covers are made of HDPE with the highest UV protection on the market today. These covers will withstand normal residential traffic.
Covers (overview)
Covers (detail)
- Skid resistance surface
- Available in green
- Includes two recessed handles for easy removal
- Highest level of UV protection included
- Special order a foam gasket for airtight and watertight applications
Forming Tubes & Footings
We’re proud to supply Bigfoot Systems® — the industry’s leading engineered footing-form solution for concrete tube footings. These pre-molded, code-approved bases replace traditional wooden footing boxes, saving time, labour, and materials on every build. Trusted across North America, Bigfoot footing forms deliver consistent quality, reliable load distribution, and easy installation for decks, additions, porches, and light commercial projects.
Footing forms
Bigfoot Systems®
Sizing reference
Greif EasyPour
Greif tubes
EasyPour lineup
Bigfoot Systems® Footing Forms
Products We Carry: BF24 & BF28
BF24 Footing Form
Designed for standard residential construction, the BF24 accepts 8" or 10" construction tubes. It provides a stable, engineered base that helps meet code requirements while offering dependable frost protection and load-bearing performance.
BF28 Footing Form
Ideal for larger residential or light commercial applications, the BF28 accepts 10" or 12" construction tubes. Its wider footprint delivers increased load capacity, making it a great choice for heavier structures or projects needing extra stability.
SquareFoot™ Footing Forms (Clearance)
SquareFoot™ footing forms deliver engineered, high-performance bases for concrete tube footings — built to work with all brands of construction tubes and designed for residential, light commercial and heavy structural applications. These molded forms feature a universal wedge system, reinforced ribs for structural integrity, rebar tie-holes at each corner and a broad flat base to increase bearing capacity.
22" Model (SF-22)
- Size: 22" overall width (56 cm), 23.5" with flange (60 cm)
- Tube compatibility: Fits 8" and 10" construction tubes
- Concrete volume: ~2.0 cubic feet (approx. 4 x 60-lb bags)
- Best suited for standard residential and light commercial footing applications
32" Model (SF-32)
- Size: 32" overall width (81 cm), 34.5" with flange (88 cm)
- Tube compatibility: Fits 12", 14", 16" and 18" construction tubes
- Concrete volume: ~7.0 cubic feet (approx. 14 x 60-lb bags)
- Ideal for heavier residential, commercial or industrial footing needs requiring larger load capacity
Greif EasyPour & Econo Concrete Tubes
Greif EasyPour™ forming tubes are a top choice for columns, footings, and pilings — offering one-time-use convenience and engineered strength. These drywall-thick, corrugated tubes are made from 100% recycled paperboard and use WeatherShield™ moisture-resistant adhesive to hold full hydrostatic pressure during a continuous pour.
- Lightweight and easy to handle, yet strong enough for manual installation or crane placement.
- Designed for reliability, using a poly-inside ply for easy removal without form-release agents.
- Available in a wide range of diameters (6″ to 60″) and lengths (up to 28 ft).
- Made with recycled materials and LEED®-qualified.
Greif Econo-Form Weathershield™ tubes provide a cost-effective, lightweight forming solution. Built from 100% recycled paperboard, they handle standard job-site demands while supporting core concrete work.
- Designed for simplicity and economy, ideal for routine column or footing pours.
- Moisture-resistant outer construction helps maintain integrity during exposure.
- Available in multiple diameters (up to 24″) to suit a variety of applications.
Why choose these tubes?
- Efficiency: One-time-use design means no cleaning or reassembling.
- Strength & performance: Engineered to handle continuous pours under real job-site conditions.
- Sustainability: Made with recycled materials, helping reduce environmental impact.
- Versatility: Broad size options make them suitable for many types of projects.
Builder Forming Tubes — Economic Tubes
Max 3 ft above ground, and sold in nests of 3.
| Product | Size (Diameter x Length) |
|---|---|
| Econo Tube | 6” x 8’ |
| Econo Tube | 8” x 8’ |
| Econo Tube | 10” x 8’ |
| Econo Tube | 12” x 8’ |
| Econo Tube | 6” x 12’ |
| Econo Tube | 8” x 12’ |
| Econo Tube | 10” x 12’ |
| Econo Tube | 12” x 12’ |
Easy Pour Tubes (Plastic Lined)
16 ft above ground, sold individually. All are 12’ lengths.
| Product | Size (Diameter) |
|---|---|
| Plastic Lined Easy Pour | 8” |
| Plastic Lined Easy Pour | 10” |
| Plastic Lined Easy Pour | 12” |
| Plastic Lined Easy Pour | 14” |
| Plastic Lined Easy Pour | 16” |
| Plastic Lined Easy Pour | 18” |
| Plastic Lined Easy Pour | 20” |
| Plastic Lined Easy Pour | 22” |
| Plastic Lined Easy Pour | 24” |
| Plastic Lined Easy Pour | 28” |
| Plastic Lined Easy Pour | 30” |
| Plastic Lined Easy Pour | 32” |
| Plastic Lined Easy Pour | 34” |
Tank Accessories
We offer a full range of septic and holding tank accessories sourced from trusted, reputable local manufacturers. From high-quality lids and risers (Polylok and Concrete) to filters, pipes, and fittings, we supply reliable components that make installation, maintenance, and repairs easier and more efficient.
Round lids
Square lids
Perforated pipe
Solid pipe
6" access riser
Equalizer end cap
12" access riser
Access riser
Our accessory inventory includes
| Tank Accessories |
|---|
| Small Distribution Box |
| Large Distribution Box |
| 24” Round Lid |
| Concrete Access Riser in 6 or 12" tall |
| Manhole Cover (all sizes - tapered) |
| Retro Lid with Riser |
| Holding Tank Alarm 30’ Cord |
| Holding Tank Alarm 50’ Cord |
| Holding Tank Alarm 100’ Cord |
| 1” Sealant (14’ Roll) |
| ½” Sealant (21’ Roll) |
| Green Mastic Sealant (14.5’ Roll) |
| Equalizer End Cap MultiPort and Chambers |
| 36” Mirafi Filter Cloth (100ft) |
| Baffle |
Plastic Pipe and Fittings
| Plastic Pipe and Fittings |
|---|
| 3” Perforated or Solid per/ft |
| 3” 45 Degree Elbow |
| 3” 90 Degree Elbow |
| 3” End Cap |
| 3” Tee |
| 4” Perforated or Solid per/ft |
| 4” 45 Degree Elbow |
| 4” 90 Degree Elbow |
| 4” Tee |
| 4” to 3” Reducer |